Make sure batteries are ready to use when you need most is the job of an A / C or D / C charger. Some of the models I recommend here offer both energy source for the convenience options and the ability to recharge in the area where the action is.
The GWS MC-2002 charger is controlled by microprocessor with Delta automatic detection peak for Ni-Cd and Ni-MH batteries. Range input voltage: DC 9.0 ~ 15.0 V Current load: 0.25 ~ 6.00A continues types of batteries: 50 ~ mAh 3000 mAh Ni-Cd or Ni-MH Cells: 4 ~ 12 cells Protection: Results reverse polarity and the short time load: 90 minutes with safety cutoff Lecture: large-scale current Meter Cooling: sturdy case with the Heavy Duty Heat Sink.From high-quality, easy to use and very affordable at around $ 45, you really can not go wrong!
When you're ready to lithium in your models, you'll need to buy a battery charger RC dedicated to lithium batteries because the technology is very different from NiMH and NiCd batteries.
And please do not make the mistake of trying to load your lithiums with a standard charger because there is the very real danger of an explosion and fire!
What I think is one of the best values in the battery charger RC area is now the ProPeak Prodigy II.
Tuesday, September 2, 2008
Subscribe to:
Posts (Atom)